Compact plants and composite lines
Le Igloo hydraulic machines can be supplemented with Auxiliary accessories such as Sherpa conveyors, feeders, hoppers, lifters and manipulators To improve productivity, reduce the effort physique of operators and optimize safety. Igloo models can be configured in Steinex production lines as primary or secondary stone shearing machines depending on the model and the desired end product. The customer can configure the Igloo machine with the standard hydraulic power unit or with the higher performance 11-kw or 15-kw units. Steinex produces a series of compact Igloo-Sherpa plants through which customers can find the ideal solution to meet their production needs.
IGLOO models 400-480-500-600 + SHERPA T
Steinex always pays attention to the organization of the workplace of operators using the machines. For this reason, it has created versions of compact systems by combining the hydraulic press to a Heavy steel flat slat conveyor belt.
Models IGLOO 480-500-600 + SHERPA BT
Igloo+Sherpa BT compact systems are the perfect solution for the load of single blocks With forks or cranes on the conveyor belt.
BROADWAY+SHERPA 600X320 - BROADWAY+SHERPA 800X280CM - BROADWAY+SHERPA 1280X400
The Broadway+Sherpa lines are designed. To split stones with two regular planes or two sawn surfaces.
MENHIR+SHERPA SERIES 3RB AND 6 RB
Over the course of more than 45 years, Steinex has carried out installations with the giant Menhir presses in several countries around the world. Numerous installations are still fully operational today Menhir+Sherpa made over 30 years does with thousands of hours worked Constantly splitting rough blocks of large size and considerable hardness. All this is possible because of the high quality of the machines designed and built in Steinex factories. The quality and robustness of these models more than any other make Steinex machines unique and fear no competitor.
MENHIR+SHERPA 1000 SERIES 3 RB
I 1000 series machinery have a total tool width of the 1000 mm blades while the passage span is 1295 mm, which allows the splitting of pieces well over one meter wide.
MENHIR+SHERPA SERIES1300 3 RB
1300 series machines have the total tool width of 1300 mm while the passage span is 1580 mm thus guaranteeing the splitting of blocks much wider than 1300 mm and are produced with 320 tons of splitting force.
MENHIR+ SHERPA SERIES 1000 - 1600 6 RB
The 1000 series machines have a total blade tool width of 1000 mm while the passage light is 1295 mm and this allows the splitting of pieces well over a meter wide.
COMPOSITE LINES FOR SPLITTING STONES
Menhir series machines are mainly used as primary machines for the splitting raw blocks and making semi-finished products from them which can then be started with Sherpa T belts to the Igloo 500 or 600 machines, which in turn will reduce the semi-finished products into pieces suitable for the production of cubes or wall stones with the Igloo 240 or Igloo 320. The Steinex technical department is available to configure together with the customer customized lines and plants that correspond to his precise needs. Finally, the Menhir+Sherpa models can also be used individually for the production of large boulders and wall stones to be laid dry in the setting of landscapes and green areas.