Splitting monolith stones

Home | Splitting stones | monolith | sawed on two planes

SPLITTING MONOLITH STONES SAWED ON TWO PLANES MACHENES

The monolith blocks sawed on two plans are transformed into slabs of the required thickness; the surfaces can then be heat treated or mechanically processed to obtain the most appropriate surface finish. Steinex Srl produces a complete range of semi-automatic or fully automatic machines and plants for splitting monolith stones sawn on two planes to meet the most demanding requirements.

This category includes the Broadway and Menhir models along with plants for splitting sawn slabs UP TO 600 MM THICK AND 1600 MM WIDE.

_UNIFORM SPLITTING OF EDGES FROM NATURAL STONE OF DIFFICULT GEOLOGICAL FORMATION

GT SPLITTING MACHINE FOR THE PRODUCTION OF HARD TO SPLIT CUBES.

The geological formation of some natural stones can make it extremely challenging to achieve a clean split edge. This is why Steinex Srl created the GT line, which has what it takes to obtain uniform and high quality splits in materials where this is usually not possible.  The GT technology is installed on 2 Igloo models, 1 Broadway model and 1 Menhir model. Finally, there is the automatic Broadway 800 GT plant for the production of cubes from hard to split materials.

CHECK THE DIMENSIONS OF THE STONE YOU WANT TO SPLIT

SAWN STONE OFFCUTS
SAWN/FLAMED SLABS UP TO 1300 MM WIDE, 300 MM THICK (MANUAL MACHINES)
SAWN/FLAMED SLABS UP TO 1300 MM WIDE, 300 MM THICK (SEMI-AUTOMATIC MACHINES AND PLANTS)
SAWN/FLAMED SLABS UP TO 1600 MM WIDE, 600 MM THICK (AUTOMATIC MACHINES AND PLANTS)
SAWN/FLAMED SLABS FROM HARD TO SPLIT STONE (MACHINES AND PLANT WITH CUTTING DISC)
Contacts








    * Mandatory fields